Category: LED Lighting Technology

MLEDHB-3 Modular Series – LED High Bay

Ideal for factories, warehouses and gymnasiums where safety is a concern.

Sensor is flush-mounted to avoid breakage. Available with frame for areas that require lamp protection. Pendant mounting (for chain or cable) standard. Optional mono-point hub/splice box for simplified HID replacements. Optional provisions for dimming/HI-LO controllable systems for additional energy savings. 

HOUSING

Die-formed 20 gauge steel with knockouts for stem, cable, or chain hangers.

LED EMISSION

Candela Plots

HARMONICS <20%

CRI >80

DIMMING

10-100%

LED DESIGN LUMENS

21,000 based on 4000K

COLOR TEMP

4000K

FINISH

All metal parts post-painted with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pre-treatment for maximum adhesion and rust resistance. Post painted door frame and ends standard. Post painted units finished in gloss white powder coat.

CERTIFICATION

ARRA and BAA compliant.

MLEDHB-3-SPEC

 

Cut Sheet

SLED FLAT BOARD, Single or Dual LED Channel

Available in 24″, 36″, 48″, 72″ and 96″ lengths in Flat Board, 1 or 2 LED tubes lamp configurations.

Combination snap in end plates double as couplers, eliminate the need for extra hardware in continuous row applications. Snap on cover makes installation quick and easy. Suitable for low density ceiling applications. Symmetric, asymmetric, and light shield reflectors available. For surface or pendant mounting, individual or continuous row mounting. Available with specular aluminum reflector (87% reflectance) high efficiency white reflector (92% reflectance) or high efficiency specular aluminum reflector (95% reflectance).

HOUSING

Die formed heavy gauge steel housing with ample knockouts for east of installation.

ELECTRICAL

LED: Highest quality driver, emmitters and power supply for long life.

FINISH

All parts finished with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

All units bear UL label. Made in U.S.A.
Suitable for damp location. ARRA and BAA compliant.

sled-pic

Cut Sheet

LED Tubes

RLE’s LED 18w tubes are being used currently on the market for conventional fluorescent T8 tubes.

9.3-LEDTUBES-diagAvailable in clear lens.

They are well suited for retail and commercial lighting and are widely used in shopping malls supermarkets, offices, restaurants and in other public and professional environments.

LED diodes using closed structure, to avoid dust and oil pollution. Integrated Driver

LED COLOR

Standard 4000K
1900 Lumens

POWER FACTOR

>0.95
CRI
>80
LIFESPAN
>50000h

CERTIFICATION

All units bear UL label. DLC APPROVED

5 year warranty.

Cut Sheet

DLLED LED Downlights

Our 6″ and 8″ DLLED Down Lights are suitable for 100-277 V Input with fire-rated Junction box, which delivers high lumens of exeptional 80+ CRI and greater than 50,000 hours lifetime. Featured at NYC’s 50th and 8th Avenue subway entrance.

Easy conversion method and installation can be performed from below the ceiling with out removing existing fixture. Ideal applications included office spaces, retail stores, education, government, healthcare, hospitality and more.

8.45-DLLED-DIagHOUSING

The reflector is made of metal material and with surface oxidized, which effectively enhances the lumen output ration.

LED COLOR

3000K, 3500K, 4000K, 5000K

ELECTRICAL

  • The external driver ensures steady performance and long lifespan.
  • Driver efficiency>87%.
  • 0-10V dimming optional.
  • Driver Input: AC100-277 V 50/60Hz
  • Driver output: DC36V

CERTIFICATION

UL Listed for Damp Location.
Energy Star rated. 5 year LED warranty.

Cut Sheet

CVALED Parking Garage Luminare CVALED48

Designed specifically for parking garage applications, this surface mount luminare is available in 48W LED, operates on 120-277V technology, and offers an unprecedented lamp life.

This D-8.41-CVALED-Garagefixture is vandal-resistant and mounts on wall or ceiling. It is designed to provide long life and high reliability in environments where an extra level of protection and security is required. The housing can be mounted directly over a standard 4″ outlet box or surface wired through ½” conduit. Suitable for wet locations, these lights are typically mounted 8-14 feet high.

HOUSING:

Durable die cast aluminum with ½” threaded conduit entries for surface wiring. A continuous one-piece gasket ensures a weather tight seal

LENS:

Clear Prismatic polycarbonate diffuser with UV inhibitors

FINISH:

Dark bronze powder paint finish is standard*

FEATURES:

  • Uses up to 88% less energy when compared to the HID equivalent
  • Instant on/off operation
  • Resistant to shock and vibration
  • Surged Protected
  • Unique optical design 5700K color temperature
  • Produces no UV radiation
  • Contains no Mercury.

CERTIFICATION:

  • Suitable for wet location
  • Made in USA.
  • ARRA and BAA compliant
  • UL listed
  • 5 year warranty

Soft Surface Design CPXNLED

Available in 1×4, and 1.5 x 4 sizes in 2 and 4 lamp configurations, T8 and T5. 

D--8.31-CPXNLED

One piece seamless cast acrylic diffuser provides uniform light diffusion with minimal brightness and contrast. Diffuser snaps in and out for easy maintenance. Unique floating design of diffuser hinges from either side with no visible hardware. Designed for surface or pendant mount.

HOUSING

Die formed heavy gauge steel housing welded into one piece for maximum strength.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

FINISH

Premium powder coat baked white enamel paint used on all reflecting interior surfaces.

CERTIFICATIONS

  • All units bear UL label
  • Suitable For damp location
  • Made in U.S.A.
  • ARRA and BAA compliant

Cut Sheet

Soft Surface Designer Series CPX

Available in 1×2, 1×4, 2×2, 2×4 sizes, in 2, 4 and 6 lamp configurations, T5, T8 and BIAX. 

D-8.42-CPXLEDOne piece seamless cast acrylic diffuser provides uniform light diffusion with minimal brightness and contrast. Diffuser hinges from either side with no visible hardware. Matte black housing finish  further disguises the shallow depth of the fixture. All white housing is available as an option. Designed for individual, surface, or pendant mount.

HOUSING

Die-formed heavy gauge steel housing welded into one piece for maximum strength.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

FINISH

Premium coat baked white enamel paint used on all reflecting interior surfaces. Matte black baked enamel on all exterior surfaces.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location. ARRA and BAA compliant

Cut Sheet

Vandalproof Security Luminaire VANY

Available in 18”, 24”, 36”, and 48” lengths, 1 and 2 lamps. 16 gauge design meets or exceeds most requirements for vandalproof lighting

installation. Polycarbonate lens is standard. Overlapping end caps are secured by 3 tamperproof spanner head screws. For individual wall or ceiling mount. Can be made for continuous row mounting with optional joiner band. Mounting holes provided in housing for secure bolting to structure. Surface conduit collars optional.

HOUSING

Die formed 16 gauge cold rolled steel. Ends are 16 gauge overlapping type.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

.125 thick polycarbonate with tongue and groove fit to housing. DR Hi-Impact acrylic is optional.

FINISH

All parts painted with premium grade white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • Suitable for damp location.
  • ARRA and BAA compliant.
  • Listed for damp location.

D-VANY

Cut Sheet

Vandalproof Fluorescent VA

Available in incandescent up to 60W, fluorescent in Circline 20W and 22W and energy efficient PL lamps. Available in the following sized: 6”x8”,

8”x8”, 12”x12” and 6”x10” nominal sizes for a variety of lamp configurations. Ideal for correctional facilities, recreational areas, institutions, schools, and any area where vandalism is a concern. Wall or ceiling mount for indoors or outdoors. Optional neoprene gasket for dust, moisture, and insect resistance. Slotted screws are standard. Spanner head screws are optional.

HOUSING

Die formed housing in heavy gauge steel. Optional aluminum housing.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

.125” thick multi-patterned injection molded clear prismatic polycarbonate with ultraviolet inhibitors. Also available with smooth opal lens.

FINISH

All parts finish with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A. UL listed for damp location.
  • ARRA and BAA compliant.
  • Optional wet location label for ceiling mount only.

D-VA

Cut Sheet

Molded Vapor Tight Luminaire SPVT

Available in 4’, and 8’ lengths, 1, 2 & 3 lamp T8, T5, and T5HO configurations. Weather resistant housing ideal for parking garages, food processing

areas, refrigerated storage, marinas, or any area where moisture protection is required. Internal gear tray replaces traditional strip fixture insert, reducing both weight and expense. Poured in place gasket and latches seal the enclosures from most hostile environments. Polycarbonate or stainless steel latches. Tamperproof latches also available. For surface or pendant mounting. Optional stainless steel snap-in mounting brackets reduce installation time and eliminate mounting holes in fixture body. For individual or continuous row with optional watertight hubs.

HOUSING

Heavy-duty unsaturated polyester housing with foamed in place gasketing. Flame class V-0, 5VA.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

Ribbed diffuser is molded of UV stabilized acrylic/DR blend to resist breakage and maintain flexibility. Optional polycarbonate diffuser available.

CERTIFICATION

  • All units bear UL label.
  • Wet Location label for National Sanitation Foundation (NSF) Approval available.
  • IP65 rated. IP67 rated when used with 8 latch configuration.

D-SPVT

Cut Sheet