Category: Linear & Architectural Lighting

Lumenera V2

The V2 is our most popular light fixture in the LUMENERA LIGHTING family providing a sleek, slim profile design ideal for today’s modern office, hospitality and retail environments. The narrow profile meets the requirements for wall mounting fixtures outlined by the Americans with Disabilities Act (ADA) and provides smooth accents for illuminating the vertical plane. For pendants and surface mounting the V2 is a powerful direct/indirect light source for common areas. Continuous rows are custom designed by our engineering team to eliminate light breaks in runs as well as shadowing.

Powered by Philips LED boards in multiple color temperatures and drivers dimmable down to just 1%, the V2 is a practical design illuminating common areas.

 

RLE Lumenera Spec Sheet-d1

 

V2-PHOTOMETRY-REPORT-30K
V2-PHOTOMETRY-REPORT-40K

LED Linear Parabolic Direct/Indirect YYBLED

Available in 35W LED, 48” lengths. Ideal for classrooms, offices, conference rooms and receprion areas. Available as direct/indirect pendant or direct surface mount.

8.55 YYBLED specIndividual or continous row mounting with cables or stems. Continious rows achieved with contoured joiners. Acrylic frosted diffuser.
Lens features snap-in installation for easy lamp replacement.

HOUSING
The housing is constructed of heavy gauge steel treated with anti rust protection.
ELECTRICAL
120-277V
Highest quality LED boards and driver system
FINISH
Fixture body post painted with white gloss enamel.
CERTIFICATION
All units bear UL label. Made in U.S.A.
ARRA and BAA compliant.

Cut Sheet

6.28 – YBB Linear Parabolic Direct/Indirect

Available in 48″ and 96″ lengths. Ideal for classrooms, offices, conference rooms and reception areas.

Available as direct/indirect pendant or direct surface mount. Individual or continous row mounting with cables or stems. Continious rows achieved with contoured joiners.

Available in one or two lamp T5 or T8 configurations.

Parabolic baffle assembly constructed from matte anodized aluminum is standard.

Louver features snap-in installation for easy lamp replacement.

HOUSING

The housing is constructed of heavy gauge steel treated with anti-rust protection.

ELECTRICAL

Instant start electronic ballast comply with Federal energy efficiency standards.

Optional electronic dimming is available.

FINISH
Fixture body post painted with white gloss enamel. Custom colors available.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • ARRA and BAA compliant

628YBB-diag

Cut SHeet

S66 Modular Luminaire S66

Available in 2’, 3’, 4’, 6’ and 8’ lengths, in 1 and 2 lamp configurations, T8 and T5. 

6”x6” narrow design is architecturally-preferred for installation in corridors, lobbies, and office areas. Direct downlight is standard. Indirect and direct/indirect applications are available as options. Individual and continuous row for both surface and pendant mounting. Alignment brackets are available for continuous row installation. Ends seams are fitted to provide the appearance of continuous smooth channel. Knockouts on channel ends allow for through wiring or end feed.

HOUSING

Die-formed, welded heavy gauge cold-rolled steel. Uplight fixtures are provided with (2) rows of 1/2” apertures along top of the housing which provide approximately 12% uplight.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

Acrylic prismatic is standard. Optional white cross baffle, paracube, and parabolic semispecular cross baffle.

FINISH

All metal parts post painted with premium grade white enamel with a minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

D-S66

Cut Sheet

Surface Module 7200

Shallow design surface module available in 1×2, 1×4, 1×8, 2×2, 2×4, & 4×4 sizes in 2, 3, 4, 6, and 8 lamp configurations in T8, T5, and BIAX.

End and side seams are welded and filled to provide the appearance of a smooth continuous channel. Flush steel doorframe is standard. Optional glare dampening ribbed aluminum regressed frame. Door frame is secured by rotary cam latches. For surface and pendant mounting individually or in continuous rows. Available with specular aluminum reflector (87% reflectance) high reflective white reflector (92% reflectance) or high efficiency specular aluminum reflector (95% reflectance).

HOUSING

Die formed heavy gauge steel housing welded for rigidity and structural stability.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

100% virgin acrylic prismatic is standard. Consult option sheet for other shieldings.

FINISH

All metal parts are phosphate coated and painted after fabrication with baked white enamel electrostatically applied providing a durable finish with a minimum 89% reflectance.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • ARRA and BAA compliant.
7200

Cut Sheet

S44 Luminaire S44

Available in nominal lengths up to 8′-0″ sections, T5 or T8 operation, custom lengths available upon request. For continuous runs please

consult factory with specific wiring instructions. Simple clean linear lines allow for this fixture to blend aesthetically into almost any space. Mounting can be accomplished using adjustable aircraft cables or rigid stems. Wall mount is also available.

HOUSING

Die formed welded 20 gauge cold rolled steel. Uplight fixtures are provided with 1 row of 1/2” apertures along top of the housing which provide approximately 12% uplight.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

DIFFUSERS

Pattern A12 acrylic lens is standard. Optional opal lens or cross blade.

FINISH

All parts finished with white polyester powder coat with minimum 89% reflectivity. Standard color is white. Other colors are available upon request.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • Suitable for damp location.
  • ARRA and BAA compliant.

D-S44

Cut Sheet

Round Luminaire RND

Available in nominal lengths up to 8’-0” sections, T5 or T8 lamping, 3.5”, 4”, 6”, 7”, and 9” diameters. Fixture is available in straight runs or

square patterns. Individual fixtures are standard. For continuous row installations, row lengths must be specified.

HOUSING

Housing constructed of durable extruded aluminum. Die cast aluminum end plates and center couplings provided as required.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

Users have the choice of cross baffles and lenses. Choice of multiple lens and baffle styles available. Direct unit is standard. Unit is also available in direct/indirect, direct only or indirect only versions.

MOUNTING

Fixture can be surface mounted or pendant mounted using cables or stems. Companion adjustable wall mounted fixtures are also available.

FINISH

All housings post-painted with a smooth white polyester powder coat. Textured finishes and other colors are available upon request.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • ARRA and BAA compliant.
  • Wet location available upon request (consult factory).

D-RND

Cut Sheet

Linear Perforated Luminaire PERF

Ideal for offices, conference rooms, reception areas, classrooms. Any installation where linear luminaries are preferred. A low-profile suspended

direct/indirect luminaire provides attractive glare-free ambient lighting. Available in 1, 2, and 3 light configurations, in T8, T5 and T5HO. Continuous rows achieved with joiner assemblies. Micro-perforated body in conjunction with opal acrylic inlay provide soft, glare free direct light with even ceiling illumination Fixtures can be cable or rigid stem mounted. Available with fully perforated basket or with optional side perforations with solid center panel.

HOUSING

Die-formed heavy gauge cold rolled steel. End caps are molded white plastic.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

Micro-perforated baffle constructed of heavy gauge steel with 5/64” diameter perforations staggered at 7/64” intervals.

FINISH

Phosphate coated baked white enamel with 87% reflectivity.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • Suitable for damp location.
  • ARRA and BAA compliant.

D-PERF

Cut Sheet