Category: Outdoor Lighting

Medium Flood Light FL

(Shown with Yoke Mount) Die cast aluminum housing with integral hinging feature for ease of maintenance. Ideal for

buildings, parks, signage, sports field, parking areas where general floodlighting is desired. Tempered glass maximum light distribution. Optional polycarbonate shield or wire guard for vandalproof protection is available. Anodized aluminum reflector designed in conjunction with diffuser for maximum efficiency. Heavy duty adjustable yoke for excellent aiming capabilities. Fully gasketed weather resistant construction. For wall or ceiling mounting. Designed for max of 400w metal halide or high-pressure sodium.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

For metal halide lamping, ballast is high power factor, constant wattage auto transformer. Electrical components are mounted to cast aluminum housing for optimum heat dissipation. For high pressure sodium, ballast is normal power factor reactor type for 120V. High power factor, multi-tap, and most fixed voltages available.

SHIELDING

Tempered glass is standard. FINISH Exterior housing is finished in architectural bronze as standard, also available in custom colors.

CERTIFICATION

  • UL and CUL listed for Wet Locations.

D-FL

Cut Sheet

Horizontal Wall Pack HWP

Die cast aluminum base plate with conduit access. Corrosion resistant housing. One piece anodized aluminum reflector

designed in conjunction with diffuser for maximum efficiency. Threaded apertures for conduit and optional photocell. Fully gasketed weather resistant construction. For wall mounting directly over standard 4” outlet box or with surface conduit. Optional tamperproof hardware is available.

HOUSING

High impact polycarbonate housing.

ELECTRICAL

For metal halide lamping, ballast is high power factor, constant wattage auto transformer. Electrical components are mounted to cast aluminum housing for optimum heat dissipation. For high pressure sodium, ballast is normal power factor reactor type for 120V. High power factor, multi-tap, and most fixed voltages available.

FINISH

Baked on premium architectural bronze for maximum durability.

CERTIFICATION

  • All units bear UL label.
  • Made inU.S.A.
  • Suitable for damp location.
  • Suitable for wet location.

D-HWP

Cut Sheet

Exterior Wall Bracket RWB

Die cast aluminum housing with integral hinging feature for ease of maintenance. Borosilicate prismatic glass optically

designed for optimum light distribution. Textured anodized aluminum reflector designed in conjunction with diffuser for maximum efficiency. Threaded apertures for conduit and optional photocell. Fully gasketed weather resistant construction. For wall mounting directly over standard 4” outlet box or with surface conduit. Optional stainless steel wire guard. Optional tamperproof hardware.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

For metal halide lamping ballast is high power factor, constant wattage auto transformer. Electrical components are mounted to cast aluminum housing for optimum heat dissipation. For high-pressure sodium, ballast is normal power factor reactor type for 120V. High power factor, multi-tap, and most fixed voltages available.

SHIELDING

Borosilicate glass is standard. Wire guard available.

FINISH

Baked on premium architectural bronze for maximum durability.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.

D-RWB

 

Cut Sheet

Cast Aluminum Exterior Wall Bracket WB

Die cast aluminum housing with integral hinging feature for ease of maintenance. Borosilicate prismatic glass optically

designed for optimum light distribution. Optional polycarbonate shield or wire guard for vandalproof protection is available. Textured anodized aluminum reflector designed in conjunction with diffuser for maximum efficiency. Threaded apertures for conduit and optional photocell provided for the flexibility during installation. Fully gasketed weather resistant construction. For wall mounting directly over standard 4” outlet box or with surface conduit. The fixture’s compact size is ideal for lamping up to 175w metal halide.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

For Fluorescent: Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise. For HID: Ballast is pre-wired, CWA HPF, core and coil with dry film capacitor and starter (if required).

SHIELDING

Borosilicate glass is standard.

FINISH

Baked on premium architectural bronze for maximum durability is standard.

CERTIFICATION

  • All units bear UL label.
  • UL listed for wet and damp locations.
  • Made in U.S.A.
  • ARRA compliant.

D-WB

Cut Sheet

Exterior Wall Bracket WBB

Die cast aluminum housing with integral hinging feature for ease of maintenance. Borosilicate prismatic glass optically

designed for optimum light distribution. Optional polycarbonate shield or wire guard for vandalproof protection is available. Textured anodized aluminum reflector designed in conjunction with diffuser for maximum efficiency. Threaded apertures for conduit and optional photocell provided for flexibility during installation. Fully gasketed weather resistant construction. For wall mounting directly over standard 4” outlet box or with surface conduit. Sizing is ideal for lamping of 100w to 250w metal halide or high-pressure sodium.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

For Fluorescent: Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise. For HID: Ballast is pre-wired, CWA HPF, core and coil with dry film capacitor and starter (if required).

SHIELDING

Borosilicate glass is standard.

FINISH

Baked on premium architectural bronze for maximum durability.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • ARRA compliant.

D-WBB

Cut Sheet

Exterior Wall Bracket WBC

Die cast aluminum housing with integral ORDERING hinging feature for ease of maintenance. Borosilicate prismatic glass

optically designed for optimum light distribution. Optional polycarbonate shield for vandalproof protection over the glass refractor. Textured anodized aluminum reflector designed in conjunction with diffuser for maximum efficiency.Threaded apertures for conduit and optional photocell. Fully gasketed weather resistant construction. For wall mounting directly over standard 4” outlet box or with surface conduit. Optional stainless steel wire guard and or tamperproof hardware is available for vandal resistance Ideal for use in wattages of up to 250w to 400w metal halide or high pressure sodium.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

For HID: Ballast is pre-wired, CWA HPF, core and coil with dry film capacitor and starter (if required).

SHIELDING

Prismatic borosilicate glass is standard. FINISH Baked on premium architectural bronze for maximum durability.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • ARRA compliant.

D WBC

Cut Sheet

Cast Aluminum Exterior Wall Bracket WPE

Die cast aluminum housing with integral hinging feature for ease of maintenance. Optional polycarbonate shield or wire

guard for vandalproof protection is available. Textured anodized aluminum reflector designed in conjunction with diffuser for maximum efficiency. Threaded apertures for conduit and optional photocell provided for the flexibility during installation. Fully gasketed weather resistant construction. Lamping up to 150 watts.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

For metal halide lamping ballast is high power factor, constant wattage auto transformer. Electrical components are mounted to cast aluminum housing for optimum heat dissipation. For high-pressure sodium, ballast is normal power factor reactor type for 120V. High power factor, multi-tap, and most fixed voltages available.

SHIELDING

Clear tempered glass is standard.

FINISH

Baked on premium architectural bronze for maximum durability is standard.

CERTIFICATION

  • All units bear UL and Made in U.S.A. labels.
  • UL listed for wet and damp locations.

D-WPE

Cut Sheet

Mini Flood Light MFL

(Shown with Yoke Mount) Die cast aluminum housing with integral hinging feature for ease of maintenance. Ideal for

buildings, parks, signage, sports field, parking areas where general floodlighting is desired. Tempered glass maximum light distribution. Optional polycarbonate shield or wire guard for vandalproof protection is available. Anodized aluminum reflector designed in conjunction with diffuser for maximum efficiency. Heavy duty adjustable yoke for excellent aiming capabilities. Fully gasketed weather resistant construction. For wall or ceiling mounting. Designed for max of 400w metal halide or high-pressure sodium.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

For metal halide lamping, ballast is high power factor, constant wattage auto transformer. Electrical components are mounted to cast aluminum housing for optimum heat dissipation. For high pressure sodium, ballast is normal power factor reactor type for 120V. High power factor, multi-tap, and most fixed voltages available.

SHIELDING

Tempered glass is standard.

FINISH

Exterior housing is finished in architectural bronze as standard, also available in custom colors.

CERTIFICATION

  • UL and CUL listed for Wet Locations.

D-MFL

Cut Sheet

Decorative Cast Aluminum Luminaire CVPL

Available for energy efficient PL 1 and 2 lamp and low wattage HPS sources. Ideal for hotels, motels, walkways, entrances,

garages, vanities, stairways, and any area where low wattage, high illumination is desired. Gasketed for dust and moisture resistance. Optional photocell for dusk to dawn operation. Ideal for wet locations.

HOUSING

One piece die-cast aluminum housing.

SHIELDING

Clear prismatic acrylic is standard. Optional white acrylic and clear prismatic polycarbonate.

ELECTRICAL

Energy saving and electronic class P, HPF ballasts comply with Federal Energy Efficiency standards.

FINISH

All exterior parts finished in architectural bronze stage polyester powder coat. Optional white finish. All reflecting surfaces are finished with baked white enamel.

CERTIFICATION

  • All units bear UL label.
  • Listed for wet location.
  • Made in U.S.A.

D-CVPL

Cut Sheet

Exterior Wall Bracket FLH

(Shown with Yoke Mount) Die cast aluminum housing with integral hinging feature for ease of maintenance. Ideal for

buildings, parks, signage, sports field, parking areas where general floodlighting is desired. Tempered glass maximum light distribution. Optional polycarbonate shield or wire guard for vandalproof protection is available. Anodized aluminum reflector designed in conjunction with diffuser for maximum efficiency. Heavy duty adjustable yoke for excellent aiming capabilities. Fully gasketed weather resistant construction. For wall or ceiling mounting. Designed for max of 400w metal halide or high-pressure sodium.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

For metal halide lamping, ballast is high power factor, constant wattage auto transformer. Electrical components are mounted to cast aluminum housing for optimum heat dissipation. For high pressure sodium, ballast is normal power factor reactor type for 120V. High power factor, multi-tap, and most fixed voltages available.

SHIELDING

Tempered glass is standard.

FINISH

Baked on premium architectural bronze for maximum durability. Optional white or Custom Color.

CERTIFICATION

  • UL and CUL listed for Wet Locations.

D-FLH

Cut Sheet