Category: Recessed Lighting

Recessed LED Troffer CBLED

 

The CBLED provides a stylish modern design ideal for office and interior commercial applications.  

Utilizing a clear prismatic polycarbonate diffuser prevents direct eye contact to the LED modules.  The edge design provides easy installation mounting into standard 1” and 9/16” tee bars or screw slot grids. Two sizes are available with multiple lumen outputs. 

HOUSING – Aluminum frame with polycarbonate diffuser

ELECTRICAL – Universal driver, 0-10V compatible with common dimming systems

SHIELDING – Unique composition provides a prismatic look.  Specifically formulated, frosted, prismatic acrylic lens provides a diffused luminance with the effective combination of excellent light transmission and haze.

FINISH – Matte white, high reflectivity powder coat finish

CERTIFICATION – All units bear UL label and are DLC listed.  Standard 5 Year Warranty.

CBLED

8.54 CBLED Specification Submittal

COMMERCIAL GRADE LED DOWNLIGHT 5” and 6” RLEDL ULTRA 5/6

APPLICATIONS:
Restaurants, Healthcare, Hospitality, Office, Property Management, Residential, Retail

HOUSING
8.56 spcsStandard Heavy Duty Steel Code Grade
Construction. 5” HOUSING AVAILABLE
New Construction Plaster Frame:
7-1/16”W x 10 3/4” L
New Construction has five 1/2”, one 34” and
four Romex knock outs.
Hanger bars allow housing to be positioned
within 24” joist span and designed to fit onto
T-Bar spine.
New Construction adjust for ceilings up to 1-3/8”
thick. 6 1/2” Ceiling Cut Out
New construction has sealed and gasketed
construction to limit air exchange between
ceiling plenum.
Performance tested to ASTM-E283
(Washington State)

ELECTRICAL
Input Voltage: 120V, Dimmable to 10%,
Instant On, Power Factor: >0.90
LED system MFR. by Sylvania.

LED COLOR
Available in 2700K, 3000K or 4000K

CRI: up to 84

POWER FACTOR: >0.90

Beam Angle: 80 Degrees

Long Life: 50,000 HRS

CERTIFICATION
UL Listed for use in damp location.
5 year warranty. Meets IECC Energy Code.
CEC compliant. Energy Star Rated LED system.

Cut Sheet

LED Recessed LED TROFFER D85PLED

The D85PLED offers the look and feel of a fluorescent luminare – subtle soft direct elements provide interest and depth accross the ceiling plane with a contemporary look that blends with today’s commercial spaces.

For recessed commerical applications such as offices, hospitals, schools etc. Suitable for use in standard 15/16” inverted T-Bar grid ceilings.

HOUSING
Low Profile troffer body with white enamel finish.

LED COLOR
3500K or 4000K.

ELECTRICAL
Driver suitable for 120v-277v operation. Available in 2 wattages to equal or exceed the output of conventional fluorescent lamps.

SHIELDING
Unique composition provides prismatic look. Specifically formulated, frosted, prismatic acrylic lens provides a diffused luminance, with the effective combination of excellent light transmission and haze.

FINISH
Matte white, high reflectivity powder coat finish.

CERTIFICATION
All units bear UL label. ARRA & BAA
Compliant. 5 year warranty. DLC Approved.

D85PLED Recessed LED Troffer-d3

Cut Sheet

K85LED – LED Recessed Module

Recessed LED module available in 1×4, 2×2, AND 2×4. Flush steel hinged and latched doorframe, screw assembled for simple diffuser replacement.

Integral metal-to-metal light seal channels eliminate light leakage on all four sides. Fixture housing flanges rolled to eliminate sharp edges.

HOUSING

Die formed heavy gauge steel housing welded for rigidity and structural stability.

LED

  • CRI>83
  • PF>90
  • Up to 50% Energy Savings
  • Solid state driver
  • 5 year warranty

SHIELDING

100% virgin acrylic prismatic is standard. Consult option sheet for other shieldings.

FINISH

All metal parts are phosphate coated and painted after fabrication with baked white enamel electrostatically applied providing a durable finish with a minimum 89% reflectance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • ARRA and BAA compliant
  • 5 YEAR WARRANTY

K85LED--daig

Cut Sheet

2×2 Modular Design Square R24V

Available in Pulse-Start Metal Halide up to 450W and High Pressure Sodium up to 400W. 

All lamps are medium base and are vertically-mounted for maximum lamp efficiency. A full compliment of shielding media for all environments. Completely prewired and assembled with removable ballast assembly. Designed for mounting in 2×2 grid (T-Bar) ceilings. Flange for gypsum board ceilings is optional. Call for other ceiling applications. Automatic resetting heat sensitive thermal protection device for non-IC installations. Cold-rolled steel doorframe with captive countersunk ¼ turn spring-loaded fastener and concealed stainless steel hinging. Stainless steel doorframes are also available as an option.

HOUSING

20 gauge CRS welded construction. Call for stainless steel housing.

ELECTRICAL

High reactance auto-transformer, high power factor, encased and potted, autoresetting type. All wattages up to 400W contain pulse start ballasts. “V” denotes a vertically-mounted lamp, mogul base.

FINISH

Detergent cleaned with iron phosphate and chromic acid rust inhibitor, chip-resistant, powder urethane polyester coating, electrostatically applied and baked.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • UL listed for wet location under covered ceiling
  • ARRA and BAA compliant

D-R24V

Cut Sheet

4×4 Recessed Luminaire G44

Available in standard 2′, 3′, 4’ and 8′ length, in 1 and 2 lamp configurations, T5 and T8. Designed for mounting in grid ceiling.

Also available as surface mount (S44), and with integral 1/2″ flange for gypsum ceilings (M44). 4”x 4” narrow design is ideal for installation in corridors, lobbies, and office areas, where space is limited. Optional asymmetrical distribution with integral reflector. Individual and continuous row for both surface and pendant mounting. Alignment joiners are provided for continuous row installation.

HOUSING

Die-formed, welded heavy gauge cold rolled steel. ½” flange is provided for gypsum ceilings if required. Optional aluminum housing.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless otherwise specified.

SHIELDING

Acrylic prismatic is standard. Optional white cross baffle and parabolic semi-specular cross-baffle are also available. Please contact us for additional shielding options.

FINISH

All metal parts are post-painted with premium grade white enamel, with a minimum 89% reflectance applied over iron phosphate pretreatment, for maximum adhesion and rust resistance. Custom colors are available upon request.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

D-G44

Cut Sheet

NYC Approved Recessed Grid Troffer ES85

Available in 1×4, 2×2, 2×4, T8, T5 and T5HO. Flush, steel-hinged and latched doorframe, screw-assembled for simple diffuser replacement.

Integral, metal-to-metal light seal channels eliminate light leakage on all four sides. Fixture housing flanges rolled to eliminate sharp edges. Integral T-bar clips on 2×4 fixtures quickly secure fixture to the grid system without the need for external parts. Engineered ballast compartment for maximum heat dissipation. Available with specular aluminum reflector (87% reflectance), high efficiency white reflector (92% reflectance), or high efficiency specular aluminum reflector (95% reflectance).

HOUSING

Die-formed, 20 gauge steel unitized into one piece. NYC approved.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless otherwise specified.

SHIELDING

100% virgin acrylic prismatic is standard. Call or consult option sheet for other shielding.

FINISH

All parts are finished with high-gloss, baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment, for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

D-ES85

Cut Sheet

1.7 – Recessed Center Basket D/I-C

Provides direct-indirect, soft, uniform illumination. Curved, perforated details combine recessed fixture advantages with efficient indirect shielding.

Perforated center basket, backed with reflective white acrylic, controls glare and veils reflections. Optional high-efficiency, frosted or opal acrylic diffuser available. Shielding is easily removed for relamping. Surface mount and flanged fixture available for drywall ceilings.

HOUSING

Die-formed, heavy gauge steel housing unitized into one piece.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty.

SHIELDING

Perforated diffuser element with matte white acrylic overlay is standard.

FINISH

All metal parts are pretreated with a phosphate bonding process. All visible parts are postpainted with an electrostatically-applied, high temperature, high reflectance, baked matte white enamel for superior quality and durability.

CERTIFICATION

  • All units bear UL Label
  • Made in U.S.A.
  • Suitable for damp locations
  • ARRA and BAA compliant

D-D-I-C

Cut Sheet

1.6 – Recessed Grid Indirect Side Basket D/I

Provides indirect, soft, uniform illumination. Curved perforated details combine recessed fixture advantages with efficient indirect shielding.

Perforated side baskets, backed with reflective white acrylic, control glare and veiling reflections, Shielding is easily removed for re-lamping. A flanged fixture is available for plaster ceilings.

HOUSING

Die-formed, 20 gauge steel housing unitized into one piece.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

Perforated diffuser elements with matte white acrylic overlays.

FINISH

All metal parts are pretreated with a phosphate bonding process and post-painted with an electrostatically-applied, high temperature, baked, matte white enamel for superior quality and durability.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

D-D-I

Cut Sheet