Category: Strips & Industrial Lighting

2 Lamp T5 Strip ST2

Available in nominal 2’, 3’ and 4’ lengths in 1 or 2-lamp configurations, T5 or T5-HO. Fully assembled housing for individual or continuous row

mounting. Predrilled mounting holes for easy installation. Can be fed through end or back of unit. Suitable for low density ceiling applications. Symmetric, asymmetric, and light shield and swivel adjustable reflectors available. Available with specular aluminum reflector (87% reflectance) high efficiency white reflector (92% reflectance) or high efficiency specular aluminum reflector (95% reflectance).

HOUSING

Die formed heavy gauge steel housing with ample knockouts for ease of installation.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

FINISH

All parts pre-painted with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • Suitable for damp location.
  • ARRA and BAA compliant.

D-ST2

Cut Sheet

Single Lamp Low Profile Strip ST

Available in nominal 2’ 3’, 4’ lengths in 1-lamp configurations, T5, 13W, 14W, 21W, 28W or T5-HO 24W, 39W and 54W. Fully assembled housing

for individual or continuous row mounting. Predrilled mounting holes for easy installation. Can be fed through end or back of unit. Suitable for low density ceiling applications. Symmetric, asymmetric, and light shield and swivel adjustable reflectors available. Snap-on diffusers in clear or opal available. Available with energy efficient reflectors in specular silver (95% reflectance) or specular aluminum (85% reflectance).

HOUSING

Die formed heavy gauge steel housing with ample knockouts for ease of installation.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

FINISH

All parts pre-painted with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • Suitable for damp location.
  • ARRA and BAA compliant.

D-ST

Cut Sheet

Right Angle Strip SSA

Available in 24”, 36”, 48”, and 96” lengths in 2 or 3 lamp configurations, T8, T5, and T5HO. Right angle design combines the benefits of the

standard and side mount strips. 2 lamp version gives 90° plane of light. 3-lamp version gives 180° plane of light. Snap on cover makes installation quick and easy. For individual or continuous row mounting.

HOUSING

Die formed heavy gauge steel housing.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

FINISH

All parts pre-painted with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • Suitable for damp location.
  • ARRA and BAA compliant.

D-SSA

Cut Sheet

Side Socket Channel SS

Available 24”, 36”, 48″ and 96” lengths, in 1 and 2 lamp configurations, T8, T5 and T5HO. Ultra thin design for cove, coffer, and under counter

applications. Snap on cover makes installation quick and easy. Knockouts on channel ends allow for through wiring or end feed. For individual or continuous row mounting.

HOUSING

Die formed heavy gauge steel housing.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

FINISH

All metal parts pre-painted with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • Suitable for damp location.
  • ARRA and BAA compliant.

D-SS

Cut Sheet

Single Or Dual Lamp Channel S

Available in 24”, 36”, 48”, 72” and 96” lengths in 1 or 2 lamp configurations, T5, T5HO, and T8. Combination snap in end plates double as couplers,

eliminate the need for extra hardware in continuous row applications. Snap on cover makes installation quick and easy. Suitable for low density ceiling applications. Symmetric, asymmetric, and light shield reflectors available. For surface or pendant mounting, individual or continuous row mounting. Available with specular aluminum reflector (87% reflectance) high efficiency white reflector (92% reflectance) or high efficiency specular aluminum reflector (95% reflectance).

HOUSING

Die formed heavy gauge steel housing with ample knockouts for east of installation.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

FINISH

All parts finished with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • Suitable for damp location.
  • ARRA and BAA compliant.

D-S

Cut Sheet

Mini Staggered Lamp Strip MSG

Available in T8, T5 and T5 HO 1 and 2 lamp configurations. Ideal for cove or cornice lighting where uniform, uninterrupted illumination is necessary.

3” lamp stagger eliminates dark spots caused by back to back sockets on standard strips. Optional side mount lamps where space is extremely limited. For surface or pendant mounting, individually or in continuous row. Optional symmetrical, asymmetrical, and light shield reflectors available.

HOUSING

Die formed heavy gauge steel welded for maximum strength.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

FINISH

All metal parts post-painted with premium grade white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • Suitable for damp location.
  • ARRA and BAA compliant.

D-MSG

Cut Sheet

Fluorescent High Bay FLHB-IOC

Available in T-8, T-5, T-5 HO, in 3, 4, 6 or 8 lamp configuration. Ideal for factories, warehouses, and gymnasiums where flying objects may be a

problem. Sensor is flush mounted to avoid breakage. Enhanced aluminum reflector maximizes light output while offering high efficiency. Available with framed wire guard and/or clear or prismatic lens for areas that require lamp protection. Pendant mounting (for chain or cable) standard. Optional mono-point hub/splice box for simplified HID replacements. Unit comes standard with open bottom. Optional provisions for dimming/HI-LO controllable systems for additional energy savings. Consult factory.

HOUSING

Die formed 20 gauge steel with knockouts for stem, cable, or chain hangers.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise. All T5HO units come standard with 90C rated ballasts.

FINISH

All metal parts pre-painted with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance. Post painted door frame and ends standard. Post painted units finished in gloss white powder coat.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • ARRA and BAA compliant.

D-FLHB-IOC

Cut Sheet

Fluorescent High Bay FLHB

Available in T-8, T-5, T-5 HO, in 3, 4, 6 or 8 lamp configuration. Also available in 10 lamp T8 or T5HO. Ideal for factories and warehouses where

high levels of illumination are required. Enhanced aluminum reflector maximizes light output while offering high efficiency. Pendant mounting (for chain or cable) standard. Optional quick connect hook with 24” cord and NEMA twist plug for chain hanging. Unit comes standard with open bottom. Available with framed wire guard and/or clear or prismatic lens for areas that require lamp protection. Optional mono-point hub/splice box for simplified HID replacements. Optional provisions for dimming/HI-LO controllable systems for additional energy savings. Consult factory.

HOUSING

Die formed heavy gauge steel with knockouts for stems or chain hangers.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise. All T5HO units come standard with 90C rated ballasts.

FINISH

All metal parts pre-painted with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance. Post painted units finished in gloss white powder coat.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • ARRA and BAA compliant.

D-FLHB

Cut Sheet

Fluorescent High Bay EFLHB

For energy efficient replacement of Metal Halide and High Pressure Sodium Fixtures. Available in T-8, T-5, T-5 HO, 4 lamp and 6 lamp

configurations. Ideal for factories and warehouses where high levels of illumination are required. Miro-4 reflector maximizes light output while offering high efficiency. White reflector also available for low bay applications. Pendant mounting (for chain or cable) standard. Optional quick connect hook with 24” cord and NEMA twist plug for chain hanging. Optional provisions for dimming/HILO controllable systems for additional energy savings.

HOUSING

Cold Rolled Steel. Finished in baked white enamel.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

REFLECTOR

Miro-4 reflector designed specifically for lamp quantity chosen (4 or 6). White reflector available. Optional uplight reflector also available.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • Suitable for damp location.
  • ARRA and BAA compliant.

D-EFLHB

Cut Sheet

Cross Staggered Lamp Strip CSG

Available in T5 and T5 HO 1 lamp configurations. Nominal 2’, 3’ and 4’ lengths. Ideal for cove or cornice lighting where uniform, uninterrupted

illumination is necessary. 6” lamp stagger eliminates dark spots caused by back to back sockets on standard strips. Optional symmetrical, asymmetrical, and light shield reflectors available. Tandem pair configurations available to simplify field installation.

HOUSING

Die formed 20 gauge steel welded for maximum strength.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

FINISH

Post-painted with premium grade white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • Suitable for damp location.
  • ARRA and BAA compliant.

D-CSG

Cut Sheet