Category: Surface Mount Lighting

Linear Architectual Wraparound LAWLED

Linear Architectual Wraparound is available in 4’ LED Flat Board Array. The versatility of this high efficiency linear, contemporary-styled unit makes it ideal for classrooms, offices, corridors, laboratories, and any application where high efficiency, task appropriate illumination is essential.

8.57 LAWLED sepcFor individual or continuous row mounting. Sufficient knockouts for surface or pendant mounting.

HOUSING
Die formed heavy gauge steel unitized into one piece.
SHIELDING
Acrylic frosted.
FINISH
Post painted in powder coated flat white polyester.
CERTIFICATION
All units bear UL label. Suitable for damp locations. Made in U.S.A. ARRA and BAA compliant.

5 year LED warranty.

Cut Sheet

8.37A – 7200LED

1×4, 2×2, and 2×4. End and side seams are welded and filled to provide the appearance of a smooth continuous channel. Flush steel doorframe is standard.

Optional glare dampening ribbed aluminum regressed frame. Door frame is secured by rotary cam latches. For surface and pendant mounting individually or in continuous rows.

HOUSING

Die formed heavy gauge steel housing welded for rigidity and structural stability.

LED

  • CRI>80
  • PF>90
  • Up to 50% Energy Savings
  • Solid state driver
  • 5 year warranty

SHIELDING

100% virgin acrylic prismatic is standard. Consult option sheet for other shieldings.

FINISH

All metal parts are phosphate coated and painted after fabrication with baked white enamel electrostatically applied providing a durable finish with a minimum 89% reflectance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • ARRA and BAA compliant
  • 5 YEAR WARRANTY

837SA-diag

Cut Sheet

SLED FLAT BOARD, Single or Dual LED Channel

Available in 24″, 36″, 48″, 72″ and 96″ lengths in Flat Board, 1 or 2 LED tubes lamp configurations.

Combination snap in end plates double as couplers, eliminate the need for extra hardware in continuous row applications. Snap on cover makes installation quick and easy. Suitable for low density ceiling applications. Symmetric, asymmetric, and light shield reflectors available. For surface or pendant mounting, individual or continuous row mounting. Available with specular aluminum reflector (87% reflectance) high efficiency white reflector (92% reflectance) or high efficiency specular aluminum reflector (95% reflectance).

HOUSING

Die formed heavy gauge steel housing with ample knockouts for east of installation.

ELECTRICAL

LED: Highest quality driver, emmitters and power supply for long life.

FINISH

All parts finished with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

All units bear UL label. Made in U.S.A.
Suitable for damp location. ARRA and BAA compliant.

sled-pic

Cut Sheet

Specification Grade Wraparound S8

Specification grade wraparound is available in 4’ and 8’ lengths, 1 and 2 lamp configurations, in T5 and T8.

8-3/8” wide housing designed for greater light distribution than its narrow counterparts. The versatility of this contemporary-styled unit makes it ideal for classrooms, offices, corridors, laboratories, and any application where high efficiency, task appropriate illumination is essential. For individual or continuous row mounting. Sufficient knockouts for surface or pendant mounting. Available with energy efficient reflectors in High Efficiency Aluminum (95% reflectance), Specular Aluminum (87% reflective), and High Efficiency White (92% reflectance.)

HOUSING

Die-formed, heavy gauge steel unitized into one piece.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

100% clear acrylic prismatic bottom with linear side prisms.

FINISH

All parts finished with high gloss, baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Suitable for damp locations
  • Made in U.S.A.
  • ARRA and BAA compliant
S8

Cut Sheet

13” Wide Wraparound S12

Specification grade wraparound is available in 4’ and 8’ lengths, 1 and 2 lamp configuration in T8 and T5. 

13” wide housing permits replacement of old 12” wide surface fixtures without costly ceiling repairs. Ideal for schools, hospitals, institutions, and any application where high efficiency and task appropriate illumination is essential. For individual or continuous row mounting. Sufficient knockouts for surface or pendant mounting. Available with energy efficient reflectors in High Efficiency Aluminum (95% reflectance), Specular Aluminum (87% reflective), and High Efficiency White (92% reflectance).

HOUSING

Die-formed 20 gauge steel ribbed for uniformity and rigidity.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

100% clear acrylic prismatic bottom with linear side prisms.

FINISH

All parts are finished with high gloss, baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment, for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Suitable for damp location
  • Made in U.S.A.
  • ARRA and BAA compliant

D-S12

Cut Sheet

2.18 – Contemporary Surface Square S24H

Available in Mogul Base Lamping, Pulse Start Metal Halide and High Pressure Sodium up to 400W. 

Full compliment of lens and louver shielding media to suit almost any lighting need. Completely prewired and assembled with removable ballast assembly. Designed for surface mount applications. Call us for other ceiling installations custom mounting brackets available if required. Automatic resetting heat sensitive thermal protection device will protect fixture from overheating if insulation covers fixture. Cold-rolled steel doorframe with captive countersunk ¼ turn spring loaded fasteners and concealed stainless steel hinging. Stainless steel doorframes are also available.

HOUSING

20 gauge CRS welded construction. Aluminum or stainless steel housing available.

ELECTRICAL

Metal Halide 100W and High Pressure Sodium 100W-150W. High Reactance Autotransformer, High Power Factor, encased and potted, auto-resetting type. Metal Halide 175W-400W and High Pressure Sodium 250W and 400 CWA High Power Factor, encased, potted and auto-resetting type.

REFLECTOR

Aluminum painted white, one piece, .030” thick.

FINISH

Detergent cleaned with iron phosphate and chromic acid rush inhibitor, chip resistant, powder urethane polyester coating, electrostatically applied and baked.

CERTIFICATION

  • All units bear UL and Made in U.S.A. label
  • UL Listed for damp location

D-S24H

Cut Sheet

Extruded Aluminum Cylinder S60/S80

Available in Metal Halide and High Pressure Sodium. Available in 6” and 8” diameters 6” units accommodate lamping up to 70W and 8″ up to 100W.

Surface mounting is standard. Optional stem and canopy mounting hardware include 3/8” I.P.S. 12” stem with 0-45 degree swivel canopy. Optional wall mounts come as a one-piece cast aluminum arm with access plate.

 

HOUSING

Heavy gauge, extruded aluminum, rolled and seam welded.

 

ELECTRICAL

For metal halide lamping ballast is high power factor, constant wattage auto transformer. For high-pressure sodium, ballast is normal power factor reactor type for 120V. High power factor, multi-tap, and most fixed voltages available.

REFLECTOR

Spun aluminum .040” thick, polished specular alzak.

FINISH

Standard in urethane polyester powder coated bronze. Optional black or white finish is also available.

CERTIFICATION

  • All units bear UL and Made in U.S.A. label
  • Suitable for damp locations
  • Optional wet location

D-S60-S80

Cut Sheet

S66 Modular Luminaire S66

Available in 2’, 3’, 4’, 6’ and 8’ lengths, in 1 and 2 lamp configurations, T8 and T5. 

6”x6” narrow design is architecturally-preferred for installation in corridors, lobbies, and office areas. Direct downlight is standard. Indirect and direct/indirect applications are available as options. Individual and continuous row for both surface and pendant mounting. Alignment brackets are available for continuous row installation. Ends seams are fitted to provide the appearance of continuous smooth channel. Knockouts on channel ends allow for through wiring or end feed.

HOUSING

Die-formed, welded heavy gauge cold-rolled steel. Uplight fixtures are provided with (2) rows of 1/2” apertures along top of the housing which provide approximately 12% uplight.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

Acrylic prismatic is standard. Optional white cross baffle, paracube, and parabolic semispecular cross baffle.

FINISH

All metal parts post painted with premium grade white enamel with a minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

D-S66

Cut Sheet

Surface Direct/Indirect Side Basket SDI

Provides indirect, soft, uniform illumination. Curved, perforated details with efficient indirect shielding. 

Perforated side baskets backed with reflective white acrylic, control glare and veiling reflections. Shielding is easily removed for relamping.

HOUSING

Die-formed, 20 gauge steel housing unitized into one piece.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

Perforated diffuser element with matte white acrylic overlay.

FINISH

All metal parts are pretreated with a phosphate bonding process, and post-painted with an electrostatically applied high temperature baked matte white enamel, for superior quality and durability.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

D-SDI

Cut Sheet

Surface Direct/Indirect Center Basket SD/I-C

Provides indirect, soft, uniform illumination. Curved perforated details with efficient indirect shielding. 

Perforated center basket, backed with reflective white acrylic, control glare and veiling reflections, Shielding is easily removed for relamping. Available in array of custom colors.

HOUSING

Die-formed 20 gauge steel housing unitized into one piece.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless otherwise specified.

SHIELDING

Perforated diffuser element with matte white acrylic overlay.

FINISH

All metal parts are pretreated with a phosphate bonding process and post-painted with an electrostatically-applied, high temperature, baked matte white enamel for superior quality and durability.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp locations
  • ARRA and BAA compliant

D-SDI-C

Cut Sheet