Lumenera V2

The V2 is our most popular light fixture in the LUMENERA LIGHTING family providing a sleek, slim profile design ideal for today’s modern office, hospitality and retail environments. The narrow profile meets the requirements for wall mounting fixtures outlined by the Americans with Disabilities Act (ADA) and provides smooth accents for illuminating the vertical plane. For pendants and surface mounting the V2 is a powerful direct/indirect light source for common areas. Continuous rows are custom designed by our engineering team to eliminate light breaks in runs as well as shadowing.

Powered by Philips LED boards in multiple color temperatures and drivers dimmable down to just 1%, the V2 is a practical design illuminating common areas.

 

RLE Lumenera Spec Sheet-d1

 

V2-PHOTOMETRY-REPORT-30K
V2-PHOTOMETRY-REPORT-40K

Entrance/Walkway Light CWPC

Ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, and tunnels. Heavy-duty die-cast aluminum

construction. Heat and impact resistant tempered glass lenses. Powder coated finish on cast aluminum housing. One piece designed anodized aluminum reflector for optimum light efficiency. Silicon rubber seal prevents leakage. Available as downlight only or up and downlight. Lamping up to 150W PSMH,150W HPS and compact fluorescent up to 42W available.

HOUSING

Heavy-duty die cast aluminum housing.

ELECTRICAL

Optimized for 150W MH and 150W HPS. Standard with 120V, 277V, or Multi-tap ballast. High Power Factor and other voltages/lamp options are also available.

FINISH

Powder coated architectural bronze is standard. Customer colors are available upon request.

CERTIFICATION

  • All units bear UL label.
  • Listed for wet location.
  • Made in U.S.A.

D-CWPC

Cut Sheet

Entrance/Walkway Light CWPD

Ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, and tunnels. Heavy-duty die-cast aluminum

construction. Heat and impact resistant tempered glass lenses. Powder coated finish on cast aluminum housing. One piece designed anodized aluminum reflector for optimum light efficiency. Silicon rubber seal prevents leakage. Standard wide throw reflector. Available as downlight only. Lamping up to 150W PSMH or 150W HPS and compact fluorescent 2-42W available.

HOUSING

Heavy-duty die cast aluminum housing.

ELECTRICAL

Optimized for 150W PSMH and 150W HPS. Standard with 120V, 277V, or Multi-tap ballast. High Power Factor and other voltages/lamp options are also available.

FINISH

Powder coated architectural bronze is standard. Other finishes are available upon request.

CERTIFICATION

  • All units bear UL label.
  • Listed for wet location.
  • Made in U.S.A.

D-CWPD

Cut Sheet

Cut-Off Mini Area Wall Pack TCWP

Die cast rear aluminum housing with one piece UV stabilized polycarbonate front cover. Available in high pressure sodium

50W- 100W, metal halide 50W-100W and compact fluorescent 26W-42W. Dark sky friendly lighting aims light 15° below the horizontal. Hydroformed aluminum reflector improves fixture performance. All units are provided with ½” threaded apertures allowing for surface conduit installation and/or optional photocell. All units fully gasketed for weather tight construction. All units may mount directly over standard 4” outlet boxes.

HOUSING

Rugged die cast aluminum rear housing.

ELECTRICAL

For metal halide lamping, ballast is high power factor, constant wattage auto transformer. Electrical components are mounted to cast aluminum housing for optimum heat dissipation. For high pressure sodium, ballast is normal power factor reactor type for 120V. High power factor, multi-tap, and most fixed voltages available. Compact fluorescent supplied with universal voltage electronic ballast.

SHIELDING

UV stabilized injection molded polycarbonate internally finished to match rear housing.

FINISH

Baked on premium architectural bronze for maximum durability.

CERTIFICATION

  • All units bear UL labels.
  • UL listed for wet and damp locations.
  • Made in U.S.A.

D-TCWP

Cut Sheet

Cast Aluminum Wall Bracket WPB

Ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, and tunnels. Heavy-duty

die-cast aluminum back housing. Color matched UV stabilized polycarbonate front housing with ribbed lens area. Front Housing is hinged for easy relamping One piece designed anodized aluminum reflector for optimum light efficiency. Silicon rubber seal prevents leakage. Lamping in compact fluorescent in 2- 18 watt, 2-26 watt, 2-32 watt and 2-42 watt and 35W, 50W and 70W HPS available.

HOUSING

Heavy-duty die cast aluminum back housing.

ELECTRICAL

Compact fluorescent standard with universal voltage electronic ballast. HPS standard with 120 volt normal power factor magnetic core and coil ballast.

SHIELDING

Polycarbonate diffuser is standard. FINISH Powder coated architectural bronze is standard. Other finishes are available upon request.

CERTIFICATION

  • UL listed for wet locations.

D-WPB

Cut Sheet

Exterior Wall Bracket AWB

Die cast aluminum housing with integral hinging feature for ease of maintenance. Borosilicate prismatic glass optically

designed for optimum light distribution. Optional polycarbonate shield for vandalproof protection over the glass refractor. Textured anodized aluminum reflector designed in conjunction with diffuser for maximum efficiency. Threaded apertures for surface conduit and optional photocell. Fully gasketed weather resistant construction. For wall mounting directly over standard 4” outlet box or with surface conduit conditions. Optional tamperproof hardware.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

For metal halide lamping, ballast is high power factor, constant wattage auto transformer. Electrical components are mounted to cast aluminum housing for optimum heat dissipation. For high-pressure sodium, ballast is normal power factor reactor type for 120V. High power factor, multi-tap, and most fixed voltages available.

SHIELDING

Borosilicate glass is standard.

FINISH

Baked on premium architectural bronze for maximum durability.

CERTIFICATION

  • All units bear UL and Made in U.S.A. labels,
  • UL listed for wet locations.

D-AWB

Cut Sheet

Entrance/Walkway Light CWPE

Ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, and tunnels. Heavy-duty

die-cast aluminum construction .Heat and impact resistant tempered glass lenses. Powder coated finish on cast aluminum housing. One piece designed anodized aluminum reflector for optimum light efficiency. Silicon rubber seal prevents leakage. Rotatable wide throw reflector. Designed for downlighting or uplighting installations. Quick install mounting bracket included. Lamping up to 150W MH or 150W HPS and compact fluorescent up to 2- 42W available.

HOUSING

Heavy-duty die cast aluminum housing.

ELECTRICAL

Optimized for 150W PSMH and 150W HPS. Standard with 120V, 277V, or Multi-tap ballast. High Power Factor and other voltages/lamp options are also available.

FINISH

Powder coated architectural bronze is standard. Other finishes are available upon request.

CERTIFICATION

  • All units bear UL label.
  • Listed for wet location.
  • Made in U.S.A.

D-CWPE

Cut Sheet

Horizontal Wall Pack HWP

Die cast aluminum base plate with conduit access. Corrosion resistant housing. One piece anodized aluminum reflector

designed in conjunction with diffuser for maximum efficiency. Threaded apertures for conduit and optional photocell. Fully gasketed weather resistant construction. For wall mounting directly over standard 4” outlet box or with surface conduit. Optional tamperproof hardware is available.

HOUSING

High impact polycarbonate housing.

ELECTRICAL

For metal halide lamping, ballast is high power factor, constant wattage auto transformer. Electrical components are mounted to cast aluminum housing for optimum heat dissipation. For high pressure sodium, ballast is normal power factor reactor type for 120V. High power factor, multi-tap, and most fixed voltages available.

FINISH

Baked on premium architectural bronze for maximum durability.

CERTIFICATION

  • All units bear UL label.
  • Made inU.S.A.
  • Suitable for damp location.
  • Suitable for wet location.

D-HWP

Cut Sheet

Exterior Wall Bracket RWB

Die cast aluminum housing with integral hinging feature for ease of maintenance. Borosilicate prismatic glass optically

designed for optimum light distribution. Textured anodized aluminum reflector designed in conjunction with diffuser for maximum efficiency. Threaded apertures for conduit and optional photocell. Fully gasketed weather resistant construction. For wall mounting directly over standard 4” outlet box or with surface conduit. Optional stainless steel wire guard. Optional tamperproof hardware.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

For metal halide lamping ballast is high power factor, constant wattage auto transformer. Electrical components are mounted to cast aluminum housing for optimum heat dissipation. For high-pressure sodium, ballast is normal power factor reactor type for 120V. High power factor, multi-tap, and most fixed voltages available.

SHIELDING

Borosilicate glass is standard. Wire guard available.

FINISH

Baked on premium architectural bronze for maximum durability.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.

D-RWB

 

Cut Sheet

Cast Aluminum Exterior Wall Bracket WB

Die cast aluminum housing with integral hinging feature for ease of maintenance. Borosilicate prismatic glass optically

designed for optimum light distribution. Optional polycarbonate shield or wire guard for vandalproof protection is available. Textured anodized aluminum reflector designed in conjunction with diffuser for maximum efficiency. Threaded apertures for conduit and optional photocell provided for the flexibility during installation. Fully gasketed weather resistant construction. For wall mounting directly over standard 4” outlet box or with surface conduit. The fixture’s compact size is ideal for lamping up to 175w metal halide.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

For Fluorescent: Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise. For HID: Ballast is pre-wired, CWA HPF, core and coil with dry film capacitor and starter (if required).

SHIELDING

Borosilicate glass is standard.

FINISH

Baked on premium architectural bronze for maximum durability is standard.

CERTIFICATION

  • All units bear UL label.
  • UL listed for wet and damp locations.
  • Made in U.S.A.
  • ARRA compliant.

D-WB

Cut Sheet