Recessed LED Troffer CBLED

 

The CBLED provides a stylish modern design ideal for office and interior commercial applications.  

Utilizing a clear prismatic polycarbonate diffuser prevents direct eye contact to the LED modules.  The edge design provides easy installation mounting into standard 1” and 9/16” tee bars or screw slot grids. Two sizes are available with multiple lumen outputs. 

HOUSING – Aluminum frame with polycarbonate diffuser

ELECTRICAL – Universal driver, 0-10V compatible with common dimming systems

SHIELDING – Unique composition provides a prismatic look.  Specifically formulated, frosted, prismatic acrylic lens provides a diffused luminance with the effective combination of excellent light transmission and haze.

FINISH – Matte white, high reflectivity powder coat finish

CERTIFICATION – All units bear UL label and are DLC listed.  Standard 5 Year Warranty.

CBLED

8.54 CBLED Specification Submittal

LED Linear Parabolic Direct/Indirect YYBLED

Available in 35W LED, 48” lengths. Ideal for classrooms, offices, conference rooms and receprion areas. Available as direct/indirect pendant or direct surface mount.

8.55 YYBLED specIndividual or continous row mounting with cables or stems. Continious rows achieved with contoured joiners. Acrylic frosted diffuser.
Lens features snap-in installation for easy lamp replacement.

HOUSING
The housing is constructed of heavy gauge steel treated with anti rust protection.
ELECTRICAL
120-277V
Highest quality LED boards and driver system
FINISH
Fixture body post painted with white gloss enamel.
CERTIFICATION
All units bear UL label. Made in U.S.A.
ARRA and BAA compliant.

Cut Sheet

Linear Architectual Wraparound LAWLED

Linear Architectual Wraparound is available in 4’ LED Flat Board Array. The versatility of this high efficiency linear, contemporary-styled unit makes it ideal for classrooms, offices, corridors, laboratories, and any application where high efficiency, task appropriate illumination is essential.

8.57 LAWLED sepcFor individual or continuous row mounting. Sufficient knockouts for surface or pendant mounting.

HOUSING
Die formed heavy gauge steel unitized into one piece.
SHIELDING
Acrylic frosted.
FINISH
Post painted in powder coated flat white polyester.
CERTIFICATION
All units bear UL label. Suitable for damp locations. Made in U.S.A. ARRA and BAA compliant.

5 year LED warranty.

Cut Sheet

COMMERCIAL GRADE LED DOWNLIGHT 5” and 6” RLEDL ULTRA 5/6

APPLICATIONS:
Restaurants, Healthcare, Hospitality, Office, Property Management, Residential, Retail

HOUSING
8.56 spcsStandard Heavy Duty Steel Code Grade
Construction. 5” HOUSING AVAILABLE
New Construction Plaster Frame:
7-1/16”W x 10 3/4” L
New Construction has five 1/2”, one 34” and
four Romex knock outs.
Hanger bars allow housing to be positioned
within 24” joist span and designed to fit onto
T-Bar spine.
New Construction adjust for ceilings up to 1-3/8”
thick. 6 1/2” Ceiling Cut Out
New construction has sealed and gasketed
construction to limit air exchange between
ceiling plenum.
Performance tested to ASTM-E283
(Washington State)

ELECTRICAL
Input Voltage: 120V, Dimmable to 10%,
Instant On, Power Factor: >0.90
LED system MFR. by Sylvania.

LED COLOR
Available in 2700K, 3000K or 4000K

CRI: up to 84

POWER FACTOR: >0.90

Beam Angle: 80 Degrees

Long Life: 50,000 HRS

CERTIFICATION
UL Listed for use in damp location.
5 year warranty. Meets IECC Energy Code.
CEC compliant. Energy Star Rated LED system.

Cut Sheet

K85LED – LED Recessed Module

Recessed LED module available in 1×4, 2×2, AND 2×4. Flush steel hinged and latched doorframe, screw assembled for simple diffuser replacement.

Integral metal-to-metal light seal channels eliminate light leakage on all four sides. Fixture housing flanges rolled to eliminate sharp edges.

HOUSING

Die formed heavy gauge steel housing welded for rigidity and structural stability.

LED

  • CRI>83
  • PF>90
  • Up to 50% Energy Savings
  • Solid state driver
  • 5 year warranty

SHIELDING

100% virgin acrylic prismatic is standard. Consult option sheet for other shieldings.

FINISH

All metal parts are phosphate coated and painted after fabrication with baked white enamel electrostatically applied providing a durable finish with a minimum 89% reflectance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • ARRA and BAA compliant
  • 5 YEAR WARRANTY

K85LED--daig

Cut Sheet

6.28 – YBB Linear Parabolic Direct/Indirect

Available in 48″ and 96″ lengths. Ideal for classrooms, offices, conference rooms and reception areas.

Available as direct/indirect pendant or direct surface mount. Individual or continous row mounting with cables or stems. Continious rows achieved with contoured joiners.

Available in one or two lamp T5 or T8 configurations.

Parabolic baffle assembly constructed from matte anodized aluminum is standard.

Louver features snap-in installation for easy lamp replacement.

HOUSING

The housing is constructed of heavy gauge steel treated with anti-rust protection.

ELECTRICAL

Instant start electronic ballast comply with Federal energy efficiency standards.

Optional electronic dimming is available.

FINISH
Fixture body post painted with white gloss enamel. Custom colors available.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • ARRA and BAA compliant

628YBB-diag

Cut SHeet

Soft Surface Design CPXNLED

Available in 1×4, and 1.5 x 4 sizes in 2 and 4 lamp configurations, T8 and T5. 

D--8.31-CPXNLED

One piece seamless cast acrylic diffuser provides uniform light diffusion with minimal brightness and contrast. Diffuser snaps in and out for easy maintenance. Unique floating design of diffuser hinges from either side with no visible hardware. Designed for surface or pendant mount.

HOUSING

Die formed heavy gauge steel housing welded into one piece for maximum strength.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

FINISH

Premium powder coat baked white enamel paint used on all reflecting interior surfaces.

CERTIFICATIONS

  • All units bear UL label
  • Suitable For damp location
  • Made in U.S.A.
  • ARRA and BAA compliant

Cut Sheet

Soft Surface Designer Series CPX

Available in 1×2, 1×4, 2×2, 2×4 sizes, in 2, 4 and 6 lamp configurations, T5, T8 and BIAX. 

D-8.42-CPXLEDOne piece seamless cast acrylic diffuser provides uniform light diffusion with minimal brightness and contrast. Diffuser hinges from either side with no visible hardware. Matte black housing finish  further disguises the shallow depth of the fixture. All white housing is available as an option. Designed for individual, surface, or pendant mount.

HOUSING

Die-formed heavy gauge steel housing welded into one piece for maximum strength.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

FINISH

Premium coat baked white enamel paint used on all reflecting interior surfaces. Matte black baked enamel on all exterior surfaces.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location. ARRA and BAA compliant

Cut Sheet

HYD Luminaire HYD

Available in 48” and 96” lengths. T8 and LED Lamps. Designed specifically for use in retail applications where product representation is crucial.

This fixture has light distribution that is also ideal for library stack lighting. Pendant, aircraft cable mounting available. Lightweight and intelligent, this fixture has been designed to assure ease of installation. Standard finish white with custom colors available as an option. Specially designed housing and reflector system provide direct light to product shelving where it is needed most. Optional up light slots to ultimate dark ceiling look.

HOUSING

The housing is made of lightweight rolled formed steel for durability and modern aesthetics.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

FINISH

Exterior of housing comes standard in a white powder coat. Custom colors are available. Optional natural aluminum and custom colors.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • Suitable for damp location.
  • ARRA and BAA compliant.

HYD

Cut Sheet

Recessed Direct/Indirect LED Troffer CVRLED

The CVRLED series is designed for recessed applications such as offices, schools and other institutions. It offers the look and feel of a

fluorescent luminaire. High reflectance optical engine delivers main beam focus through optically designed acrylic lens. Linear arrayed LED modules provide soft, effective lumination with no hot spots. HOUSING Die formed heavy gauged cold rolled steel. For use with standard 15/16” grid T-bar ceilings with earthquake feature.

LED COLOR

Standard in 4000K. Consult factory for other Kelvin temperatures.

ELECTRICAL

350ma driver suitable for 120v-277v operation. Available in 2 wattages to equal or exceed the output of conventional fluorescent lamps.

SHIELDING

The Lumieo® acrylic diffuser center “V” adds character to the optical assembly.

FINISH

Matte white, high reflectivity powder coat finish.

CERTIFICATION

  • All units bear UL label.
  • ARRA & BAA Compliant.
  • 5 year warranty.
  • Design Lights Consortium Certified.

8.25 CVRLED 2015

 

Cut Sheet